How To Reset Oil Change Light On Jeep Wrangler

Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021)

Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021) – The Jeep Wrangler is an off-road vehicle produced by the American car manufacturer Jeep since 1987 to replace the CJ. Over the years, four different series have been made, named YJ, TJ, JK, and JL.

In 2007 the third generation of the Wrangler was introduced, called the JK. It was available in 3.8 petrol and 2.8 diesel versions. The fourth-generation was introduced in 2018.

Contents

1 Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021)
- 1.1 3rd Generation JK (2008-2017)
- 1.2 4th Generation JL (2018-2021)
  - 1.2.1 With Gas Pedal
  - 1.2.2 With Cluster Display

Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021)

When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Jeep Wrangler:

3rd Generation JK (2008-2017)

Time needed:7 minutes.

The easiest way to reset the oil light on the Jeep Wrangler is by pressing the gas pedal. Here's how to get started:

Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
Fully depress the GAS pedal, three times within 10 seconds
Don't rush, make sure you press it fully
Turn off the ignition
Press the ENGINE START/STOP button once
Verify the indicator has been reset by starting the engine
Done!

4th Generation JL (2018-2021)

For the vehicles 2018 model year or above, you can reset the oil through gas pedal or through the instrument cluster by using the EVIC control buttons. Here's how to do it:

With Gas Pedal

The fastest way to reset the oil light on the Jeep Wrangler is by depressing the GAS pedal three times within 10 seconds after turning on the ignition without starting the engine.

With Cluster Display

Press the ENGINE START/STOP button twice without pressing the brake pedal to make the vehicle in the RUN position without start the engine
Go to the VEHICLE INFO by using the ▼navigation button

Scroll to the OIL LIFE menu by using the ◄ ►navigation button
Press and hold the OK button to execute the oil life reset

These instructions are based on the Jeep Wrangler owner's manual. This procedure should apply to the third and fourth generations of the Jeep Wrangler (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Oil Life Reset: Jeep Wrangler Oil Change Required Light (2008-2021) can solve your problem. Good Luck!